Ofline
97769 days on xHamster
85976M profile views
30206K subscribers
67880 comments left

Webcam 666

You can make the motion to send and email, or that the asterisk send a SMS (if your provider allows it) instead of a call.2 Mpixel camera with manual focus; works with fswebcam and v4l4j on Raspbian Wheezy armhf; problems with 1600x1200 resolution in some apps (timeouts - probably too slow USB); 1280x1024 and lower resolutions works OK Works at 1280x720 taking stills in fswebcam with some errors using MJPEG, unusable with YUYV. Has some stabilitiy issues if powered from Ras Pi (Drops USB eth0 every 8 or so hours). By default the image is bit too software enhanced (they call it "sharpness"), but this "sharpness" level can be set to a lower level via fswebcam tool.I'm guessing the outstanding USB issues are causing this; my WNR3500 router handled 960x720 at 15fps, while the Pi will crash the stream at anything over 960x720 at 2fps. That's not good enough for me It will run MUCH more efficiently on even smaller devices with even less RAM.

Penalties of Copyright Infringement: By reproducing, republishing or redistributing the work of a copyright holder without permission, you may be violating or infringing on his or her rights under the Copyright Act.

PS i choose the mods not the viewers so no asking.* MODS (that cam)- Ashleyy_x, Thebbwprincess- plz visit these cool rooms (when i aint on that is ;p)*MODS (that dont cam)- Funs33ker, Papertiger23, Greygallen, Tworrell ****************************************************************************************************************************************************************************************************************************** LEGAL PRIVACY POLICY: Any UNAUTHORIZED use of my profile, video, pictures or audio in any form or in a forum now or in the future is NOT permissible without my expressed written consent.

Any act to promote or gain profit in any manner (e.g.

Helps to append nodrop=1 and timeout=5000 to uvcvideo module. works fine with external power, image/video quality is crisp. corruption gets solved for a poor 320x240 4fps after putting options usbcore autosuspend=-1 in /etc/modprobe.d/and then reboot.

Caution: Pi may hang (at least not accessible remotely) when using the UVC video kernel module. Higher resolutions and framerates still get corrupt.

[email protected] ~ $ sudo motion [0] Processing thread 0 - config file /etc/motion/[0] Motion 3.2.12 Started [0] ffmpeg LIBAVCODEC_BUILD 3482368 LIBAVFORMAT_BUILD 3478784 [0] Thread 1 is from /etc/motion/[1] Thread 1 started [0] motion-httpd/3.2.12 running, accepting connections [0] motion-httpd: waiting for data on port TCP 8080 [1] Failed to open video device /dev/video0: [1] Could not fetch initial image from camera [1] Motion continues using width and height from config file(s) [1] Resizing pre_capture buffer to 1 items [1] Started stream webcam server in port 8081 [1] Retrying until successful connection with camera [1] Failed to open video device /dev/video0: [1] Retrying until successful connection with camera [1] Failed to open video device /dev/video0: [1] Retrying until successful connection with camera [1] Failed to open video device /dev/video0: [1] Video signal lost - Adding grey image [1] Retrying until successful connection with camera [1] Failed to open video device /dev/video0: ^C[0] httpd - Finishing [0] httpd Closing [0] httpd thread exit [1] Thread exiting [0] Motion terminating [email protected] ~ $ ls /dev/video* /dev/video0 [email protected] ~ $ lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 0412 Standard Microsystems Corp.

Please or register to post comments
If spammers comment on your content, only you can see and manage such comments Delete all

Webcam 666 introduction

Webcam 666

Recent posts

09-Dec-2018 13:54
09-Dec-2018 22:17
10-Dec-2018 04:41